Bionic 140

Scope of supply

To be installed in a pump pit

  • 1 Floating aerator, for oxygen saturation (32 mm air hose excluded);
  • 2 Grinderpumps, for cutting all big particles and to pump up the water (50 mm water hose excluded, 10 mtr power cable included);
  • 2 Float switches, for low water protection of the grinderpumps (10 mtr power cable included).

Control frame

  • 1 Stainless steel frame of 500 x 1000 x 1630 mm (20” x 40” x 64”) on which all following components are built;
  • 1 Low pressure air blower of 80.000 ltr/h (15320 GPH) with air intake filter, for the floating aerator and the bioreactors;
  • 2 Air manifolds, for one floating aerator and up to maximum 8 bioreactors;
  • 7 Air flow meters with valve, for controlling the air towards each bioreactor;
  • 2 Water pressure indicators Bar/PSI, for reading the water pressure towards the cyclone;
  • 2 Water manifolds, for up to maximum 8 hydro-cyclones;
  • 7 Hydro-cyclones of 2.000 ltr/h (500 GPH) each, for separating all particles bigger then 5 micron (0,005 mm) before entering the bioreactors;
  • 1 Control cabinet with main switch, all necessary components and control lights;
  • 1 Nutrient can support in stainless steel, mounted on the side of the frame;
  • 1 can of 10 liter (2.6 Gal) Rowafil SR20 Nutrient, for stimulation of the biological process. One can per 2 months;
  • 1 Small nutrient dosing pump, installed on the can support;

Bioreactor

  • 7 Stainless steel bioreactors in unique 8-shape of 750 x 1225 x 1925 mm (30” x 48” x 76”) each, for biodegradation of all organic waste via an internal down flow biobed. On the top a 600 mm (24”) round entrance with sealed cover, 1½” ventilation socket, 1½” air inlet socket and an 1½” water inlet socket. On the front at the bottom a 63 mm (2½”) PVC automatic flush valve 24V S4 and on the front at the top a 2” clean water out socket (for pipe 50 or 63 mm). The whole reactor is placed on 2 stainless steel beams.
  • 7 bottles of biological process start up, 1,1 liter (0.29 Gal). The Rowafil Startup Accelerator is concentrated biomass for a fast and controlled biological start.

Various

  • 14 reinforced hoses for connection of air and water between frame and bioreactors;
  • 8 pallets with 8 complete covering boxes for safe shipment of the Bionic 140.

Request offer

Type: Bionic 140
Capacity: 14000 ltr/h / 3500 GPH
Bioreactors: 7
Frame and cyclones: 1 twin frame with 7 cyclones
Floor dimensions: 1300 x 6700 x 1975H mm
Sludge pit: 14000 ltr. minimum
Aerationpit: 6000 ltr. minimum
Recycle water tank/pit: 4000 ltr.
Power supply: 6,2 kW
SR20 nutrient consumption: 10 ltr. per month

Request offer

Offer request for: Bionic 140

Sitemap - Website by Forwart