Bionic 60

Scope of supply

To be installed in a pump pit

  • 1 Floating aerator, for oxygen saturation (32 mm air hose excluded);
  • 1 Grinderpump, for cutting all big particles and to pump up the water (50 mm water hose excluded, 10 mtr power cable included);
  • 1 Float switch, for low water protection of the grinderpump (10 mtr power cable included).

Control frame

  • 1 Stainless steel frame of 500 x 500 x 1630 mm (20” x 20” x 64”) on which all following components are built;
  • 1 Low pressure air blower of 58.000 ltr/h (13750 GPH) with air intake filter, for the floating aerator and the bioreactors;
  • 1 Air manifold, for one floating aerator and up to maximum 4 bioreactors;
  • 3 Air flow meters with valve, for controlling the air towards each bioreactor;
  • 1 Water pressure indicator Bar/PSI, for reading the water pressure towards the cyclone;
  • 1 Water manifold, for up to maximum 4 hydro-cyclones;
  • 3 Hydro-cyclones of 2.000 ltr/h (500 GPH) each, for separating all particles bigger then 5 micron (0,005 mm) before entering the bioreactors;
  • 1 Control cabinet with main switch, all necessary components and control lights;
  • 1 Nutrient can support in stainless steel, mounted on the side of the frame;
  • 1 Can of 10 liter (2.6 Gal) Rowafil SR20 Nutrient, for stimulation of the biological process. One can per 4 months;
  • 1 Small nutrient dosing pump, installed on the can support;

Bioreactor

  • 3 Stainless steel bioreactors in unique 8-shape of 750 x 1225 x 1925 mm (30” x 48” x 76”) each, for biodegradation of all organic waste via an internal down flow biobed. On the top a 600 mm (24”) round entrance with sealed cover, 1½” ventilation socket, 1½” air inlet socket and an 1½” water inlet socket. On the front at the bottom a 63 mm (2½”) PVC automatic flush valve 24V S4 and on the front at the top a 2” clean water out socket (for pipe 50 or 63 mm). The whole reactor is placed on 2 stainless steel beams.
  • 3 bottles of biological process start up, 1,1 liter (0.29 Gal). The Rowafil Startup Accelerator is concentrated biomass for a fast and controlled biological start.

Various

  • 6 reinforced hoses for connection of air and water between frame and bioreactors;
  • 4 pallets with 4 complete covering boxes for safe shipment of the Bionic 60.

Request offer

Type: Bionic 60
Capacity: 6000 ltr/h / 1500 GPH
Bioreactors: 3
Frame and cyclones: 1 frame with 3 cyclones
Floor dimensions: 1300 x 3000 x 1975H mm
Sludge pit: 7000 ltr. minimum
Aerationpit: 4000 ltr. minimum
Recycle water tank/pit: 2000 ltr.
Power supply: 3,2 kW
SR20 nutrient consumption: 10 ltr. per 4 months

Request offer

Offer request for: Bionic 60

Sitemap - Website by Forwart